Despite being such a small piece of metal, door hinges are responsible for the movement, alignment, and also handling of the weight of the door. If they malfunction, jam, or break, you may need to replace them, especially in the bathroom.
So, how to replace the door hinge of the bathroom in Singapore? It’s an easy thing to do if you know about the right tools and techniques that we’ll tell you about in this piece of writing. Also, If you need professional assistance with services related to custom toilet doors, bifold toilet doors, glass toilet doors, etc., LS Toilet Door Singapore is your best choice.
Why Replace the Door hinge of the Bathroom?
You may need to replace the door hinge of the bathroom in Singapore because of these reasons:
- Rust and Corrosion – Your bathroom hinges are always dealing with the water, which can make them rusty. They’re then hard to close and open.
- Loose or Wobbly Hinges – When the hinges are old, their screws can lose, which can make the whole door shaky and also misaligned. It’ll also create issues with the closing and opening as the hinges won’t be supporting the door properly.
- Squeaky or Noisy Hinges – The other issue with the old hinges is that they cause squeaky sounds when you move the door. That’s annoying and also a sign that the hinge is wearing out.
- Broken or Cracked Hinges – If the hinge is broken or cracked, it won’t support the door, and the door may fall. That can cause serious injuries and also damage that will cost a lot to get repaired.
- Door Getting Stuck – The door can be badly stuck due to the faulty hinge and it’ll keep you from taking a bath in an emergency.
- Preventing Further Damage – If you neglect to replace the faulty bathroom door hinge, it can damage the door’s frame and also the floor. That will cost pricey repairs and even upgrading.
These are the reasons why you need to replace the door hinge in Singapore. But, how to replace the door hinge?
How to Replace the Door Hinge of the Bathroom in Singapore?
Simply just follow these steps to replace the hinge of your bathroom door easily.
1. Get the Right tools
You need to get all the right tools that you’ll require to replace the door’s hinge of your bathroom. This will keep you from running after the tools during the process, wasting a lot of time and energy. So, get all the following tools set so you can dive right into the process.
- A screwdriver or drill
- New door hinges
- Screws
- A hammer and chisel (if needed)
- Lubricant (if the old hinges are rusty)
2. Remove the Old Hinges
When you have all the tools, now open up the door so you can easily access the hinges. Then, use a drill or a screwdriver to carefully unscrew the old hinges from the door. The hinges can be too dusty or rusty. You can use lubricant in that case and let that dry for some minutes before trying again.
If the hinges are too tightly attached to the door, then use a hammer to tap on them so that they get loosened and easily removed. Just be careful throughout the process so you may not damage the door.
3. Prepare the Door and Frame
When the old hinges are removed, check the frame and clean out rust, dust or any leftovers. Also, check if the recess of the new hinges is the same as the old ones. If not, use a chisel to adjust that so that the new hinges can fit properly. If the holes are too wide, fill them with wooden toothpicks with glue and let them dry before doing anything.
4. Attach the New Hinges
The next step is to place the new hinges in the exact position as the old ones were. Align them properly and ensure that they stay flush against the wall, the door, and the frame. Then, insert the screws into the holes and then secure them using any screwdriver or drilling.
Just make sure that you don’t over-tighten screws, as it can strip the screw’s holes and weaken the grip of the hinges. Secondly, ensure that the hinge’s pin is inserted adequately, as that’s what makes the hinge do the swinging work of the door.
5. Reattach the Door
If you took the door off, it’s time to put it back. Hold it in place and line up the new hinges with the frame. If possible, get someone to help steady it. Screw in the hinges, making sure they’re tight and straight. Once everything is secure, open and close the door a few times to check that it moves smoothly without sticking or making noise.
6. Test the Door
You’ve successfully replaced the door hinges of the bathroom. It’s now time to check the door if it’s working fine or not. If the door sticks and doesn’t open or close properly, or you feel it is misaligned, then loosen the screws a little. Also, adjust the hinges before tightening them again.
Secondly, open and close the door and see if it’s working fine without sagging or rubbing against the frame. If you can hear any squeaky sound, then simply apply some lubricant. That’s how to replace the door hinge of the bathroom in Singapore.
Final Words:
How to replace the door hinge of the bathroom in Singapore? Replacing a bathroom door hinge in Singapore requires careful execution for a secure and functional door. Before starting, gather the right tools, including a screwdriver, drill, measuring tape, pencil, level, and new hinges. Then, unscrew and remove old hinges carefully to avoid damage.
Clean and prepare the hinge area for a smooth installation. Align and attach new hinges properly for a secure fit. Secure the door, then check door movement and adjust if necessary.