Does your bathroom door look old or battered? The easiest way to improve the appearance of your bathroom in Singapore is to replace a wooden toilet door. It may seem like a huge task, but it is not that challenging. Singapore’s humid weather is known to wear down wooden doors quickly.
This guide will reveal how to replace a Wooden Toilet Door step-by-step. It is easy to follow, and even people new to DIY can follow along. Also, if you need professional assistance with services related to Aluminium toilet doors, folding toilet doors, PVC toilet doors, etc., LS Toilet Door Singapore is your best choice.
Why Replace a Wooden Toilet Door?
Wooden toilet doors in Singapore get old quickly. The humidity can make them warp or crack. They might not close properly anymore. A new door makes your bathroom look nice. It also keeps things private and works better. If your door is damaged or just looks old, it’s time to replace a wooden toilet door.
Materials You Need for Replacing a Wooden Toilet Door
These items are required when replacing a Wooden Toilet Door:
- New Wooden toilet door: Select the door that suits your bathroom.
- Screwdriver: Find the Phillips or the flathead that fits the screws.
- Measuring tape: To take the measurement of the door.
- Hammer and chisel: To screw in the hinge
- Hammer and chisel: To fix hinges.
- Drill and drill bits: For hinges or handles.
- Screws and hinges: See if they come with the door.
- Sandpaper: To smooth the door’s edges.
- Paint or varnish: To protect the door.
- Level: To make sure the door is straight.
- Safety gear: Use gloves and safety glasses.
Having these tools ready will make the job easier.
Step-by-Step Guide to Replace a Wooden Toilet Door
Step 1: Measure the Old Door
The first thing to do is measure your existing door. Always use a measuring tape. Find out height, width, and thickness. In Singapore, the majority of the toilet doors are of standard sizes. However, some HDB Flats have unique sizes. Take the readings. Just check them twice. This will help you get the right door.
Step 2: Remove a Wooden Toilet Door
Open the door of a wooden toilet as wide as it can open to remove the door. Check the hinges that are mounted on the door frame. It typically has three hinges. With the screwdriver, remove the screws. Begin at the lower part of the door. Then do the middle. And lastly, finish with the top. This holds the door in place. Delicately pull out the door. Keep it out of the way.
In case the screws are stuck, apply WD-40. It is available in Singapore stores. Spray it and leave it for a few minutes. Then give it one more go.
Step 3: Prepare the New Door
Unpack the box of your new wooden toilet door. Inspect if it is damaged. You can paint or varnish it if it is not. This shields it against the humid air of Singapore. Sandpaper should be used to round off any rough edges. Put the old door over the new one. With a pencil, mark where the hinges and handle should be. This ensures that everything is in line.
Step 4: Put on Hinges and Handle
Fit hinges to the new door. Put them in the place of the pencil marks. Pick up a chisel and a hammer. Drill tiny holes to insert the hinges. This aids them to sit flat. Use a drill or a screwdriver to screw in the hinges. To locate where the knob and latch will go, draw an outline of the handle. The lock on most Singapore toilet doors is simple. Use the handle instruction. Drill holes where a latch is needed.
Step 5: Hang the New Door
Now is the time to hang the door. The hinges need to be lined up with the holes in the door frame. Install the top hinge first. Then in the middle. And finally, the bottom. Check the level of the door to see whether it is straight. Otherwise, tighten the screws. Open and close the door. In case it sticks, then sand the edges. Keep testing until it moves easily.
Step 6: Finish Up
Look for gaps around the door frame. Fix small gaps with weatherstripping or sealant. You can buy these at Giant or FairPrice Xtra in Singapore. They help with privacy and block drafts.
If you painted the door, fix any spots that need more paint. Test the handle and lock. They should work smoothly. Your door should open and close easily.
Should You Hire Someone?
You can replace a wooden toilet door yourself. But some people like to hire help. In Singapore, try to find a reliable carpenter. It might cost SGD 150 to SGD 400. The price depends on the door and the work. If the door frame is tricky, a professional is better.
Doing it yourself saves money. It feels good to finish the job. With a few hours and tools, you can do it.
Where to Buy Doors in Singapore
You can find wooden toilet doors at the following places:
- Home-Fix: They sell a lot of doors and tools.
- Horme Hardware: Excellent choices when the budget is tight.
- IKEA Singapore: Has stylish and trendy doors.
- Lazada or Shopee: Online Shopping with Delivery to Your Home.
Look out for sales such as the 11.11 sale or Black Friday to save on products.
Conclusion
It is a simple way to replace a wooden toilet door in Singapore to improve your bathroom. Measure carefully. Remove the old door. Install the new one. Singapore’s humidity means you need a strong door.
Keep it maintained. You can do this yourself or hire help. Either way, this guide makes it easy to replace a wooden toilet door. Your bathroom will look great and work perfectly.