Is your toilet door frame cracked, damaged, or just outdated, and you want to upgrade it? Then you may want to replace it with a new one. Replacing a toilet door frame may seem like moving a mountain. Some people do it, but not without damaging the surrounding walls.
But don’t worry, it’s not as difficult as you think. Read this article, where we’ll teach you step by step how to replace a toilet door frame without damaging the walls in Singapore. Also, if you need professional assistance with services related to bifold toilet doors, HDB toilet doors, PVC toilet doors, etc., LS Toilet Door Singapore is your best choice.
How to Replace a Toilet Door Frame Without Damaging Walls in Singapore?
Don’t want to spend money on hiring a professional to replace a toilet door frame? It’s alright, we’ll help you do it yourself by teaching you step by step how to replace a toilet door frame without damaging the surrounding walls or causing any loss. Just follow these easy steps:
Step 1: Get Everything Ready
You lose your focus and productivity when you have to run after the tools during the process. For that reason, we professionals recommend that you please get the following things ready so that you can focus only on the toilet door frame replacement rather than running after things.
These are the things that you’ll require to replace a toilet door frame at your home in Singapore:
- Hammer and chisel
- Paint and brush (if you want a clean finish)
- Screws or nails
- Measuring tape
- Saw (only if you need to trim the frame)
- Drill
- Wood filler or wall putty
- Screwdriver
- Level
- New toilet door frame
Step 2: Take the Old One Out
Let’s get over with the first challenge, which is to carefully remove the old door. Get a screwdriver and then remove the old frame from the hinges using it. While you’re unscrewing, make sure to hold the door securely so it doesn’t fall and get damaged. If you find it tricky to hold the door and unscrew at the same time, don’t hesitate to ask someone for help.
Once all the screws are removed, use a hammer and chisel to loosen the frame. If it’s stuck and doesn’t come off easily, you can use a knife to cut through and remove any adhesive.
Take your time and avoid rushing to prevent any accidental damage. After the frame is removed, you might notice some holes or cracks left behind. Patch them up with filler, and then you’re all set for the next step:
Step 3: Measure the Space
It’s time to make your measuring tape work a little. Take one and measure the width and height of the door opening. Measure from a few spots to be sure. Then, match the measurement with your new frame, and if it’s too big for the opening, trim it down a little. But be careful while trimming so that you do not overdo it.
Spend some time perfectly completing this step, as doing it wrong or skipping it can cause you a lot of trouble in the future.
Step 4: Fit the New Frame
Pick up the new frame now and place it in the opening, making sure it’s straight and fitting well. You can use a level to ensure it’s straight right there in the opening. Don’t be in a hurry; take your time to flush it with the wall and ensure it’s perfectly lined up.
When it’s in, screw one side first, then move to the other side, and finally to the top. Drill small holes in the door so that screws can easily go in without damaging anything.
Step 5: Put the Door Back
When the door frame is perfectly placed, it’s time to put the door back on it. Get the door and align its hinges with the frame. Screw them in, then open and shut the door a few times to ensure it’s working fine. If it sticks, scrapes, or is too loose, you can adjust the hinges accordingly by either tightening them more or less, depending on the issue.
Step 6: Finish It Off
Is the door working fine without shaking or creating any issues? Great, you’ve replaced the door. The second step is to paint it, which is basically an optional step. Use moisture-resistant paint that works well on wood and whatever materials the frame is made of. Just make sure to clean the door before painting it. When the painting job is done, let the door dry for some time before starting to use it.
Final Words
How to replace a toilet door frame without damaging the walls in Singapore? To replace a toilet door frame without damaging the walls in Singapore, gather your tools first. Remove the old door and frame gently. Measure the opening carefully.
Trim the new frame if needed. Position and align it with a level, then drill in screws carefully. Reattach the door and check its swing. Finish by painting the frame if desired. Take your time and do everything gently.