Replace a sliding toilet door in Singapore to get better functionality in your bathroom and improve the aesthetics of your house. Whether replacing an old door or installing a new and stylish one, knowing your way around the installation process can save you a lot of time and money. Thus, we have come up with the perfect guide to help you in replacing a sliding toilet door.
How to Replace a Sliding Toilet Door
Here are the step-by-step guidelines you should follow for sliding toilet door replacement:
1. Gather Your Materials
You will need some basic plumbing tools to replace sliding toilet doors. Here are some of the most important materials you are going to need for this purpose
- New sliding door
- Safety goggles
- Gloves
- Utility knives
- Level
- Replacement track, if needed
- Screwdriver
- Suction cups
- Tape
- Plastic bags or cloth
- WD-40 or some other lubricant for smoother sliding
Also, If you need professional assistance with services related to custom toilet doors, glass toilet doors, HDB toilet doors, etc., LS Toilet Door Singapore is your best choice.
2. Remove The Old Door
Once the materials are ready, you can start with the replacement process. The first step is to remove the old door from the sliding tracks. For this purpose, open the sliding door in a fully open position. Lift the sliding door from its tracks, and the bottom part will be free.
Then, tilt the upper part outwards to remove the door from the bottom tracks. You can also remove the tracks by unscrewing them if you want to replace them. Otherwise, you can just clean the tracks before installing a new door.
3. Fix The Door In The Upper Track
In the next step in the sliding toilet door replacing guide, you should install the rollers on the top of the door. These rollers will fit into the upper track. Using a pencil, you must mark the place for the rollers on the door again. You can then use a drill to fit in the screws and secure the rollers in the top track.
Lift the door high up and fix the rollers into the top track. This step will be very smooth if you have correctly secured the rollers and the top tracks. Slide the door left and right to see if it slides smoothly.
4. Install The Guide And Door Stops
The bottom guide keeps the door in place. A drill and screws will come in handy in this step as well. Use both of these tools to make a secure guide that will keep the door from swinging outside the doorway.
Door stops also prevent the door from swinging out on any side of the doorway. Thus, they have to be installed on both sides. You can install the door stops by following the exact installation steps given in the installation manual.
5. Make Final Checks
In the last step to replace a siding toilet door, you should check all the screws, tracks, and doorstops to ensure that they are working fine. Clean up the doorway and the sliding tracks. Ensure that there aren’t any bits or pieces of wood or screws coming out. They can limit the mobility of the door and reduce its life.
Check the door’s alignment to ensure it is level with the ground and the tracks. If you find any issues with the alignment, you can adjust the rollers and the guide to correct them. Properly aligned doors work smoothly and last a long time. Thus, we strongly recommend that you deal with the alignment issues precisely.
Conclusion
We have discussed in detail the process to replace a sliding toilet door. The first step is to remove the old glass door from its frame and dispose of it. Next, check the door frame for any signs of damage and inspect the holes in the hinges.
Put the new door into the frame and attach it using rollers and guides. Check the door and the frame for any gaps and misalignments. Clean the area after you are done installing the door. Sliding toilet door replacement Singapore companies also offer installation and replacement services. You can contact them if you encounter any issues during installation.