A shower door offers a good blend of functionality and aesthetics, and the process to install a framed shower door is quite easy as well. A well-installed framed shower door can be a great way to keep the moisture well within the designated shower area and the bathroom dry. It also gives the whole bathroom a complete and modern look and can enhance the overall shower experience.
Many people, though aware of the advantages of a framed shower door, don’t know the correct way to install it. While the whole process might seem daunting, with the right tools and a patient approach, it can be done without much effort.
This guide will walk you through the whole process of a framed shower door installation so that you can enjoy the functionality and aesthetics of a completed bathroom. Also, If you need professional assistance with services related to aluminium toilet doors, sliding toilet doors, HDB toilet doors, etc., LS Toilet Door Singapore is your best choice.
Why Install A Framed Shower Door
There are many benefits of having a framed shower door in your bathroom, such as
1. Better Water Containment
A framed shower door is better than a shower screen at keeping water inside the shower area. The frame of the door creates a watertight seal around the edges and prevents any leakage of water into the bathroom. Thus, a framed door can easily keep the whole bathroom clean and dry and prevent any slipping accidents on the wet tiles.
2. Enhanced Stability And Durability
A framed shower door provides better stability and protection to the glass panels. It can easily prevent the panes from getting damaged due to impact damage or other warping issues. With a framed shower door, you are also less likely to run into any misalignment issues, making it a durable and long-lasting option without extra maintenance.
3. Low Maintenance
Since a framed shower door provides better protection to the glass panels, it can easily prevent any breaks or chippings in the glass. Thus, you won’t have to take extra care while handling the glass door after installing a framed shower door. In addition, cleaning the glass panels is also quite easy in a framed door compared to other frameless screens.
How To Install A Framed Shower Door
Here is the step-by-step guide to install a framed shower door in your bathroom
1. Prepare The Area
Before you begin the installation process, you must prepare the area and take adequate measurements. Measure the height and the width of the shower entrance to get an accurate idea about the door size you will use.
Use a level to ensure the base and the walls are even and plumb. If there are any irregularities, you must use attachments to make them even. Remove any obstacles like furniture or mats that can hinder the installation process.
2. Install The Bottom Track
Once you have ensured the shower door’s position and measurement, you can install the bottom track. Put the bottom track on the shower curb and fit it so it sits snugly and properly aligns with the opening. Secure the bottom track by marking the places for the screws and the anchors and drilling them in with a screwdriver or a drill.
3. Install The Side Rails
Once you have installed the bottom track, you can install the side rails following a similar process. Attach the side rails to the wall and ensure that they fit snugly on the wall and are properly aligned with the wall and the bottom track. Mark the position for screws in the wall, and secure the rails by drilling in the screws.
4. Install The Top Tracks
In the last step, you can install the top tracks and complete the frame for the glass panels. Fit the top track on the side rails and ensure a proper alignment and snug fit.
5. Install The Glass Panels
Next, you can install the glass panels into the frame. Depending on the exact type of frame, you will either have to slide the panes into the tracks or secure them with hinges. Once the panels have been installed into the tracks, check the door’s movement and ensure that it can open and close without any hindrance.
6. Apply Sealant
In the end, apply a generous amount of sealant to the edges of the frame, both on the inside and the outside. Smooth the sealant with your finger or a tool and let it set for some time. This sealant will prevent water from leaking from the edges of the frame.
7. Finishing Touches
After the sealant has cured, you can clean the glass panes with a clean microfiber cloth or a sponge to give them a good shine. You should also check the screws and anchors to make sure that they are properly tightened.
Conclusion
We have discussed the complete process to install a framed shower door. A framed shower door is a good option for cleaning and spotless the bathroom. It can also keep the bathroom dry by keeping the water inside the shower area.
To install a shower door, you must install the top and bottom tracks and the side rails. Secure all the tracks in place with the help of screws and install the glass panels. Apply sealant around the edges of the frame to make a watertight seal, and clean the whole frame at the end to give it a good shine.