If you prefer a space-saving design in your bathroom, the best thing you can do is install a pivot toilet door. These doors are attached to the frame by top and bottom pivots. These pivots allow the doors to swing forward and backward. Unlike traditional hinges, which only allow one-directional movement, pivot doors can open and close in two directions. They are becoming common in Singapore due to their compactness and space-saving properties.
The doors’ working mechanism might be tricky, but their installation process isn’t. The whole project can be done quickly with the right guide to help you. The only thing you need to decide beforehand is the actual place of the pivots on the door. The rest of the process is pretty straightforward. Let’s discuss this process so you can easily install a pivot door in your bathroom.
What Are Pivot Toilet Doors
Pivot toilet doors differ from other traditional doors in certain respects. Traditional doors have hinges on the sides, allowing them to open only in one direction. In contrast, pivot doors consist of a pivot mechanism on the top and the bottom.
These pivots can be customized to move the door in two directions. This means that you can open the door by pushing or pulling them. Such a design proves very useful in settings where space optimization is a concern.
How To Install Pivot Toilet Door – Step-by-Step Guide
Here is the step-by-step guide to install a pivot toilet door in your bathroom. Also, If you need professional assistance with services related to aluminium toilet doors, sliding toilet doors, HDB toilet doors, etc., LS Toilet Door Singapore is your best choice.
1. Measure The Door Frame
Before you begin the installation process, you must know the size and dimensions of the door frame. That way, you will be able to buy the right-sized door. Follow these steps to take measurements.
- Measure the frame at three places: the top, bottom, and middle for width and the left, right, and center for height.
- Take into account any irregularities in the frame that need correction.
- Double-check the measurements with the door you have to ensure that they match. If you want a new door, ensure it fits in the frame.
2. Prepare The Door Frame
Preparing the door frame is the next step in the pivot toilet door installation process. Clean the frame and remove old nails, hinges, dirt, or debris. Inspect the frame and take care of the following points.
- The frame should not have any cracks or breaks. If it does, fix it first before installing the door.
- The frame should be properly aligned. Check the alignment with a level to confirm.
- There should be adequate space around the frame so the door can move freely.
3. Install The Bottom Pivot Bracket
The bottom pivot bracket is installed at the base of the frame. Follow these steps to install the bracket.
- Position the bracket on the corner of the frame. Ensure that the bracket aligns with the pivot axis.
- Mark the position of the screw holes on the floor with a marking pencil.
- Position the bracket on the base and secure it with screws. Make sure that the bracket is level and fits snugly on the frame.
4. Install The Top Pivot Bracket
In the next step, to install a new pivot toilet door, you have to install the top bracket, which is attached to the top of the frame.
- Align the top bracket directly in line with the bottom pivot to ensure proper alignment. Use a level to check the alignment before securing the top pivot.
- Position the bracket on the top and mark the location for screws in the ceiling. Secure the bracket with screws once you have drilled their pilot holes.
5. Install The Pivot Hinges
Attach and secure the top and bottom hinges on the top and bottom of the door. Make sure that the two hinges align with each other for smooth operation. Use screws to properly secure the hinges to prevent any issues with the movement.
6. Position The Door
Once the brackets are installed, you can position the door. Lift the door and position the bottom pivot pins into the bottom pivot. Tilt the door and position the top pivot pins into the top bracket. Check the door’s movement and ensure that it is smooth and stable.
7. Test The Door
Once the door is secure in its place, check its movement by opening it several times. Open and close the door in both directions to ensure it moves smoothly. Check for any squeaks, misalignments, or gaps that need adjustment. Finally, clean the door to remove dirt or debris from the door or the frame.
Conclusion
Pivot toilet doors are pretty functional and suitable for small and compact spaces. With a DIY approach, you can easily install a pivot toilet door in your bathroom. You just need the proper measurements and an idea about the position of the pivots. In the first step, attach pivot brackets on the top and bottom parts of the frame.
Lift the door and secure it with the brackets by joining the top and bottom pins with the pivots. Check the movement of the door and ensure that it is smooth. If installing a pivot toilet door in Singapore is difficult, you can take the help of professional plumbers to do the job for you.