A bathroom door lock isn’t only crucial for your privacy but also for the security of children, as well as elderly people. Most modern locks these days have a feature that allows you to open the door even from outside in case somebody gets locked in.
But, installing a bathroom door and choosing the right one can be overwhelming for some people. Therefore, in this article, we’ll teach you how to install a bathroom door lock in Singapore professionally. Everything from selecting the right lock to installing it will be explained in detail. Also, If you need professional assistance with services related to bifold toilet doors, sliding toilet doors, folding toilet doors, etc., LS Toilet Door Singapore is your best choice.
How to install a Bathroom Door Lock in Singapore?
Installing a bathroom door lock in Singapore isn’t as difficult as you might think. Just follow every step to do it correctly.
Step 1: Choose the Right Lock for Your Bathroom Door
No matter how beautifully you install the door lock of your bathroom, if it’s the wrong lock, then it’ll cause issues. So, choose the right lock for your bathroom door in Singapore out of the following available types.
- Privacy locks – This is the type of lock that offers a simple turn button from inside and an emergency unlock from outside. It can be super helpful for people with children and elderly people who may lock themselves in the bathroom and not know how to come out.
- Bolt locks – The bolt locks are the most secure but are not often used in the bathrooms.
- Magnetic locks – Magnetic locks are modern door locks that you can use. They’re secure and also stylish at the same time.
Step 2: Gather Your Tools
When you’ve selected the door lock for your bathroom, the second step is to get all the following tools. That includes:
- A screwdriver (flathead or Phillips, depending on your lock)
- A drill (only if your door doesn’t already have holes)
- Measuring tape
- A pencil (for marking spots)
- Chisel (for adjusting the lock space, if needed)
Step 3: Remove the Old Lock
Some of you may already have an old lock installed on the bathroom door. So, you need to remove that one first by following these steps:
- Get a screwdriver and loosen the screws of the existing lock. Do it gently so you don’t damage the door.
- Then, pull out the latch system inside the door lock. It’s a piece of metal that you can easily pull out.
- Lastly, take out the strike plate that is on the door frame.
You’ve now prepared a clean surface of your new lock to be installed.
Step 4: Mark the Spot for the New Lock
If your door doesn’t already have holes for a lock:
- Get the new lock and hold it against the wall where you want it installed.
- Then, get a pencil and mark where the screws and the latch need to go.
- You can also use a drill to create the holes for the screws and the latch system.
This step is only applicable for people who don’t have holes on their locks. You can skip this step if you have the lock with the holes.
Step 5: Install the Latch Mechanism
Next, install the latch mechanism into your door lock by following these steps;
- Locate the hole on the side of the door and then slide the latch into that.
- Make sure while sliding that the angled edge of the latch system is facing the door’s frame.
- When the latch is placed properly, then use the screwdriver to tighten the screws to secure it in place.
Step 6: Attach the Door Handle or Lock Mechanism
It’s now the time to attach the door handle or lock mechanism, which is the main part. This is the guide to do that.
- Place one side of the lock (or handle) on the door.
- Insert the spindle (the metal rod that connects both sides) through the latch.
- Attach the other side of the lock and line up the holes.
- Screw everything in place but don’t over-tighten, or the handle may not turn properly.
Step 7: Install the Strike Plate on the Door Frame
The strike plate is a metal part on the door that the latch clicks into. You can install that with this little guide.
- Hold the strike plate where the latch hits the frame.
- Mark the screw holes with a pencil.
- Drill small pilot holes (if needed) and screw the strike plate in.
Step 8: Test the Lock
After installing a bathroom door lock in Singapore, test the door to see if it’s working fine or not. To do that, firstly close the door and turn the lock, is it working fine? Then, check the emergency lock by trying to open it from the outside.
Lastly, check if the door is opening and closing fine without getting stuck. If for any reason the door lock isn’t working properly, adjust the latch alignment with the strike plate. Loosen the screws slightly and then adjust. That’s how to install a bathroom door lock in Singapore.
Final Words:
How to install a bathroom door lock in Singapore? You can do that by following these steps. Choose the right lock for your bathroom door to ensure security and durability. Gather your tools, including a screwdriver, drill, chisel, measuring tape, and new lock.
Remove the old lock if replacing one. Mark the spot for the new lock, then install the latch mechanism securely. Attach the door handle or lock mechanism, install the strike plate on the door frame, and test the lock to ensure it works smoothly.